How to connect a Windows computer to a wireless network using a Canon mg2922 setup that is Wi-Fi protected. Make sure your printer is connected and turned on before you start. In front of it will be a light-up button. While the printer is turned on, press and hold the Wi-Fi button until the amber alert light flashes.
Release your hold on the Wi-Fi button as soon as it starts to flash. Make sure the power and Wi-Fi lights are on and flashing quickly after that. While the Wi-Fi light is blinking, press and hold the WPS button on your wireless network or access point. You could notice a button similar to this one on your router. When the Wi-Fi light starts to flash, you have two minutes to finish this step. Once the Wi-Fi light has stabilised and stopped blinking, the printer and wireless router are connected.
MG2922 Canon Pixma wifi setup and installation
After turning on your computer, insert the CD ROM that comes with Canon Pixma mg2922 Troubleshooting to configure your printer and install drivers. To obtain the installation files, go to the Canon website. Click on these links to download the printer's software and configure WiFi on the Canon Mg 2922.
Open the downloaded file on your computer, then start by following the instructions on the welcome screen. After choosing wireless land connection as your connection type, click Next to select access point connection. When you select Next, the programme will check to see if your printer is already turned on and attached to the network. If this is your first time installing the printer, the list should be blank. There was no checkbox that allowed you to select a printer from a list. Click Next if the printer is already listed. The installation of the wireless printer will begin after selecting Next on the next two windows. When you hit the WPS button, you can see this or this on your screen. Click Next to find your printer on the network. Select your printer and click Next when you see the window indicating that the connection was successful. You may access the License Agreement screen by choosing a piece of software from the list that appears. Select yes to continue with the installation. The software installation will now be completed by selecting Next.
The Canon Mg2922 printer's wireless network configuration
It can take some time to download the Canon Mg2922 technical handbook. Click Next when the dialogue box indicating that the Canon mg2922 configuration is finished displays. After choosing complete, the printhead alignment screen appears. Select the execute button on the screen. Start the printhead's alignment. You must follow all instructions that are shown to you on the screen. To end the application after the printhead alignment is finished, click Next.
build a printer At this time, you will be prompted to register your product. If you want to register right away, a new window will open after registration is finished. The new survey programme must now be installed. The extended survey campaign won't begin immediately away if you decide not to take part. Place some plain paper in the printer to open the test print window, then select "Agree" to print a test page. Click execute after printing a test page. You can also omit the test printing by choosing next. When you see this screen, click Exit to finish the installation. When WPS has been activated, the Canon Pixma mg 2922 may now be fully setup to a wireless network and used to print or scan.
References: Canon Pixma mg2922 Setup
