Balers have a steel frame that supports a hydraulic ram powered by an electric motor-driven pump. Hydraulic oil is then pumped under pressure to the cylinder and moves the plunger (ram) against the material that is being baled. The material is packed into a dense block (bale) in the bale chamber. Once it is made, it is tied by hand or mechanically and ejected from the baler.http://www.visionbaler.com/scrap-baler-machine/

Interlocking bricks are manufactured by blending and squeezing Sand, Soil, and Cement in a machine to enhance the strength and quality of the structure.http://www.txlsk.com/container-yard-pavement/

When you need a reliable analysis tool to provide fast and accurate Positive Material Identification (PMI), turn to the DELTA. From turnings, shavings, rods, and wires to small parts and components, to more sizeable material or structures, the DELTA provides anywhere, anytime testing with faster and more accurate results than ever before.http://www.skyray-instruments.....net/metal-analyzer/x

Viscosity: The flow of lubricating grease is strongly non-linear due to the decrease in viscosity with increasing shear rate, called shear thinning. In general, the viscosity reaches a maximum plateau at low shear rates and a minimum plateau at high shear rates.http://www.sino-grease.com/hig....h-temperature-grease

Originally developed for the military and aerospace industries, drones have found their way into the mainstream because of the enhanced levels of safety and efficiency they bring. These robotic UAVs operate without a pilot on board and with different levels of autonomy. http://www.satuav.com/helicopter-drone/