What is needed?

Here's what you'll need:

• Sandpaper - I used 80 grit and 150 grit sandpaper for this, but you can use any kind of fine grain sandpaper that is available to you.
• Wet Sandpaper - This will help to smooth out the surface of your print even more. Hold your piece under running water while sliding it across the wet sandpaper; this will remove excess resin and give a smoother finish than dry sanding alone. You can also use a sponge soaked in water instead of using wet paper if it's easier for you!
• Water - It may seem obvious, but make sure there's plenty of clean water around so that if something happens (like an accident), then everything will be cleaned up quickly and easily! Also don't forget about having some spare containers on hand just in case something spills over before getting washed off properly."

Prepare your 3d print

The first step to smoothing 3D prints is to ensure that the print itself is cleaned properly. Before you start, it's recommended that you use a sharp blade to remove any strings from the print and wipe off any dust with a damp cloth.

Start sanding

Use a fine grit sandpaper and wipe it over the print in a circular motion to remove any rough edges and surface imperfections. This may take some time, but the results will be worth it! You can use an electric sander if you want to speed things up. Just make sure that you're careful not to damage other parts of your 3D printed model as well as yourself! When you're done with the fine grit sandpaper, move onto medium grit paper and repeat the process once more—this helps smooth out even more imperfections that might have been missed during initial finishing steps.

Once everything is nice and smooth, apply a layer of glue across all surfaces of the model (except for where joints meet). Let this glue dry completely before moving on; otherwise it could ruin your chances at success later on by sticking unevenly or causing unwanted bumps in certain areas which would need extra attention during final finishing steps later down below!

Apply the finishing layer

Once the print is finished, you need to apply a finishing layer. This is an optional step, but it will make your prints look much more professional and clean.

You can use a paint brush to apply this layer, as well as foam rollers and paint sprayers (but not spray bottles). The most common way to smooth 3D prints is by using a wet sponge, but there are other options that may work better for you depending on where you live.

Apply the top coat

To smooth a print, you'll need to apply a layer of sanding paper on top of the print, then sand it with sandpaper until it's smooth. You can use a hair dryer to heat up the print and make it easier for you to sand. Heat can also help remove bubbles from your 3D prints if they have any.

Recommended to use the creality ender-3 3d printer

The Creality Ender-3 3D Printer is a low cost but high performance 3D printer. It is a good choice for beginners, who want to learn about 3D printing and get a reliable machine at an affordable price. The Creality Ender-3 comes with an LCD touch screen, auto-leveling sensor and heated bed, which makes it easy to operate, stable and reliable. It has a print speed of 130 mm/s, layer thickness between 0.1mm -0.4mm (100 microns), accuracy of ± 0.05mm on X/Y axis, Z axis precision of 0.01mm (10 microns). This makes the Creality Ender-3 one of the best budget 3D printers on the market today!

3d printing is a great hobby, and it's fun to play around with different finishes on your prints!

Though 3D printing is a great hobby, and it's fun to play around with different finishes on your prints! Don't worry too much about the finish you choose—they'll all work fine. If you're not happy with the result, or if you want to try something different, just change it later.

The Creality Ender 3 is a great entry level 3d printer for those who want to get into the hobby. It's an affordable machine, has good build quality and can print some pretty impressive prints with some work. The Ender 3 has all the features needed for basic printing needs, but it does have its limitations that can be improved upon with upgrades like heated bed or upgraded extruders. Overall we liked using this printer because of its simplicity and ease of use which makes it perfect for beginners who are just getting started in this field!